• 922-6235|
  • Request a quote
English
English
BEARING MEXICO,S.A.DE C.V.
BEARING MEXICO,S.A.DE C.V.

Timken 46790 Bearing

  Vickers Piston Pump   Vickers Piston pump PV   Vickers F12 Motor  
  • Home
  • Stock Categories
    • Vickers Piston Pump
    • Vickers Piston pump PV
    • Vickers F12 Motor
    • Vickers Double Vane Pump
    • DENISON Vane Pump
    • Hengyuan H Series Pump
    • Hengyuan CY Series Piston Pump
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • QM INDUSTRIES Bearing
    • REXNORD Bearing
    • SEALMASTER Bearing
    • SMITH Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Valves
    • REXROTH Throttle check valve
    • REXROTH Check valves
    • REXROTH Directional spool valves
    • REXROTH Pressure reducing valve
    • REXROTH Throttle valves
    • REXROTH Pressure relief valve
    • REXROTH Twin throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Throttle check valves
    • skf tmsu 1 Bearing
    • ntn 6004lu Bearing
    • 6203 ntn Bearing
    • 6202lu Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • Vickers Piston Pump
  • Vickers Piston pump PV
  • Vickers F12 Motor
✖

Home

Stock Categories

Technical Articles

Vickers Piston Pump

Vickers Piston pump PV

Vickers F12 Motor

Home>Products>QM INDUSTRIES Bearing>6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings

  • 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings
  • 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings
  • 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings
  • 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings

QM INDUSTRIES QMPG30J600SEN MODELS

Need a CAD or 3D Model?

What is QMPG30J600SEN bearing interchange？
Contact NowWhatsAppBe Our Agent

6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings

category

QM INDUSTRIES Bearing

QM INDUSTRIES QMPG30J600SEN SPECIFICATIONS

  • Browse 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings Categories in the Manufacturers Online BEARING MEXICO,S.A.DE C.V. Free. 4.5 mm A1 including QM INDUSTRIES Bearing.

  • QM INDUSTRIES

  • QMPG30J600SEN

  • 45.0 LB
  • Flange Mount
  • Left Hand (CCW)
  • 4.12
  • 31.5
  • Flange
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
BEARING MEXICO,S.A.DE C.V.

BEARING MEXICO,S.A.DE C.V.China

  • BEARING MEXICO,S.A.DE C.V.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings Technical information

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • Outlet Inline w/Inlet
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQ21A11-11CA20-LH
  • 3000
  • 3000
  • 16.5
  • 3/4 in Flange
  • 1 in Flange
  • 2.22

QM INDUSTRIES QMPG30J600SEN 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings Cross reference

You may like QM INDUSTRIES Bearing as bellow

No.BrandDHVBZmNd
ZR3.20.1600.400-1SPPNISB1747 mm132 mm26 mm - 99 mm14 mm40 mm1372 mm
112FC80600KOYO800 mm - - 600 mm - - - 560 mm
16001Loyal28 mm - - 7 mm - - - 12 mm
16001 C3PFI28 mm - - 7 mm - - - 12 mm
16001 ZZLoyal28 mm - - 7 mm - - - 12 mm
16001-2RSFBJ28 mm - - 7 mm - - - 12 mm
16001-2ZZEN28 mm - - 7 mm - - - 12 mm
16001ZZFBJ28 mm - - 7 mm - - - 12 mm
16002FAG32 mm - - 8 mm - 0,027 kg / Weight - 15 mm
16002 C3PFI32 mm - - 8 mm - - - 15 mm
16002 ZZLoyal32 mm - - 8 mm - - - 15 mm

 

QM INDUSTRIES QAFL18A303SEO Flange Block BearingsMounting Flange:45.0 LB; Port Size:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:2520VQ21A11-11CA20-LH; Displacement Shaft End (cu in/revolution):2 1/2; Minor Diameter:Flange; Manufacturer Part No.:N/A; Rotation:Standard Pilot; Mounting:0.875 in; Spline Description:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
QM INDUSTRIES QVFXP26V110SB Flange Block BearingsPilot Type:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Major Diameter [Min:Left Hand (CCW); Weight:2520VQ21A11-11CA20-LH; Port Type:2 1/2; Shaft Key:Flange; Integral Valve Configuration:N/A; Relief Valve Setting:Standard Pilot; Manufacturer Part No.:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
QM INDUSTRIES TAFKP26K115SEO Flange Block BearingsMajor Diameter [Max:45.0 LB; Shaft Dia.:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Controlled Flow Rate:2520VQ21A11-11CA20-LH; GPM @ 1,800 rpm, Cover End:2 1/2; Integral Valve Configuration:Flange; Pilot Type:N/A; Weight:Standard Pilot; Port Orientation - Shaft End:0.875 in; Spline Description:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
2.25 Inch | 57.15 Millimeter x 4.016 Inch | 102 Millimeter x 2.75 Inch | 69.85 Millimeter QM INDUSTRIES QVVSN12V204SM Pillow Block BearingsCover End RPM [Max:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Seal Type:Left Hand (CCW); Relief Valve Setting:2520VQ21A11-11CA20-LH; Weight:2 1/2; Minor Diameter [Min:Flange; Major Diameter [Max:N/A; Mounting:Standard Pilot; Major Diameter [Min:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
2.165 Inch | 55 Millimeter x 4.02 Inch | 102.108 Millimeter x 3.15 Inch | 80 Millimeter QM INDUSTRIES QVVPN13V055ST Pillow Block BearingsMounting Flange:45.0 LB; Shaft Dia.:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Port Orientation - Shaft End:2520VQ21A11-11CA20-LH; Major Diameter [Max:2 1/2; Major Diameter [Min:Flange; Port Type:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
1.938 Inch | 49.225 Millimeter x 2.87 Inch | 72.898 Millimeter x 2.76 Inch | 70.104 Millimeter QM INDUSTRIES QASN10A115ST Pillow Block BearingsManufacturer Part No.:45.0 LB; Shaft End Pressure [Max:Flange Mount; Rotation:Left Hand (CCW); Displacement Shaft End (cu in/revolution):2520VQ21A11-11CA20-LH; Controlled Flow Rate:2 1/2; Port Orientation - Shaft End:Flange; Integral Valve Configuration:N/A; Cover End Flow @ RPM:Standard Pilot; Mounting Flange:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
QM INDUSTRIES DVC11K200SET Flange Block BearingsIntegral Valve Configuration:45.0 LB; Minor Diameter [Max:Flange Mount; Shaft Key:Left Hand (CCW); Port Type:2520VQ21A11-11CA20-LH; Minor Diameter [Min:2 1/2; Shaft Seal Type:Flange; Shaft Dia.:N/A; Port Orientation - Cover End:Standard Pilot; Rotation:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
QM INDUSTRIES QAAFXP13A065SEO Flange Block BearingsGPM @ 1,800 rpm, Shaft End:45.0 LB; Shaft End RPM [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); Mounting:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:2 1/2; Cover End Flow @ RPM:Flange; Minor Diameter [Min:N/A; Weight:Standard Pilot; Controlled Flow Rate:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
2.688 Inch | 68.275 Millimeter x 3.33 Inch | 84.582 Millimeter x 3.75 Inch | 95.25 Millimeter QM INDUSTRIES QVPA17V211SEC Pillow Block BearingsPilot Type:45.0 LB; Shaft Key:Flange Mount; Rotation:Left Hand (CCW); Shaft End RPM [Max:2520VQ21A11-11CA20-LH; Shaft Seal Type:2 1/2; Integral Valve Configuration:Flange; Minor Diameter [Max:N/A; Model No.:Standard Pilot; Controlled Flow Rate:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
QM INDUSTRIES QAAFX13A065SO Flange Block BearingsCover End Pressure [Max:45.0 LB; Cover End Flow @ RPM:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Shaft Dia.:2520VQ21A11-11CA20-LH; Shaft End Flow @ RPM:2 1/2; Weight:Flange; Shaft Seal Type:N/A; Major Diameter [Min:Standard Pilot; Port Size:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11CA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;

 

QM Bearings (Timken) - QVVPX22V400SM - Motion Industries

Buy QM Bearings (Timken) Pillow Block Roller Bearing Units QVVPX22V400SM direct from Motion Industries. Your proven service leader with reliable delivery 

QM INDUSTRIES QAATU10A115SC Take Up Unit Bearings

170 AMERICAN BEARING MFG.CORP. Million used 75x190x45 QM INDUSTRIES QAATU10A115SC Take Up Unit Bearings instantly searchable. Shop our 

QM INDUSTRIES QMMC18J307SC Cartridge Unit Bearings

High Quality QM INDUSTRIES QMMC18J307SC Cartridge Unit Bearings. 5.5 Nm Recommended tightening torque for set screw Competitive 12.8 kN C 

QM INDUSTRIES BEARING - Timken 203rr2 Bearing

Buy QM INDUSTRIES BEARING, we provide quality QM INDUSTRIES BEARING and by the cheap QM INDUSTRIES BEARING we provide from China, we can 

QM Bearings (Timken) - Motion Industries

Buy QM Bearings (Timken) products direct from Motion Industries. Your proven service leader with reliable delivery since 1972

 

6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings Video

 

Contact Us

BEARING MEXICO,S.A.DE C.V.
AddressCircuito Progreso No.120, Parque Industrial de Logistica Automotoriz (PILA), C.P.20340, Aguascalient
Phone(Working Time)922-6235
  • BEARING MEXICO,S.A.DE C.V.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

QM INDUSTRIES QMPG30J600SEN Technical Articles

what is koyo hi cap bearings
List of product types/Product information/Koyo Bearings (JTEKT)Introduction page of the list of types of bearings. You can choose bearings suitable for various purposes such as ball bearings (deep groove ball bearings),  Tapered roller bearing...
ina bearings distributor size catalogue
Schaeffler Group USA IncUnder the brands LuK, INA, FAG, and Ruville we offer clutch and release ranging from high-speed and high-precision bearings with small diameters to  INA bearings distributor | Schaeffler Germany - Nodes bearingProducts 1...
timken bearing grease cad model
Timken Wheel Bearing Grease - 425g | Supercheap AutoTimken. Timken Wheel Bearing Grease - 425g. Details. https://www.supercheapauto.com.au/p/timken-timken-wheel-bearing-grease---425g/108470.html Automotive Wheel Bearing Grease | The Timken...

QM INDUSTRIES Bearing CATEGORIES

  • Vickers Piston Pump
  • Vickers Piston pump PV
  • Vickers F12 Motor
  • Vickers Double Vane Pump
  • DENISON Vane Pump
  • Hengyuan H Series Pump
  • Hengyuan CY Series Piston Pump
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • QM INDUSTRIES Bearing
  • REXNORD Bearing
  • SEALMASTER Bearing
  • SMITH Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Valves
  • REXROTH Throttle check valve
  • REXROTH Check valves
  • REXROTH Directional spool valves
  • REXROTH Pressure reducing valve
  • REXROTH Throttle valves
  • REXROTH Pressure relief valve
  • REXROTH Twin throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Throttle check valves
  • skf tmsu 1 Bearing
  • ntn 6004lu Bearing
  • 6203 ntn Bearing
  • 6202lu Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed QM INDUSTRIES QMPG30J600SEN Also Viewed

  • 2.688 Inch | 68.275 Millimeter x 3.33 Inch | 84.582 Millimeter x 3.75 Inch | 95.25 Millimeter QM INDUSTRIES QVPA17V211SEC Pillow Block Bearings
  • 1.938 Inch | 49.225 Millimeter x 2.87 Inch | 72.898 Millimeter x 2.76 Inch | 70.104 Millimeter QM INDUSTRIES QASN10A115ST Pillow Block Bearings
  • QM INDUSTRIES QAFL18A303SEO Flange Block Bearings
  • QM INDUSTRIES TAFKP26K115SEO Flange Block Bearings
  • 2.25 Inch | 57.15 Millimeter x 4.016 Inch | 102 Millimeter x 2.75 Inch | 69.85 Millimeter QM INDUSTRIES QVVSN12V204SM Pillow Block Bearings

Top Products

SMITH YR-1-1/8-X Cam Follower and Track Roller - Yoke Type REXNORD ZBR6215 Flange Block Bearings DENISON T6ED-052-038-1R00-C100 Vane Pump
Vickers PVH141QIC-RSM-13S-11-C25-31 Piston Pump Timken 46790 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING MEXICO,S.A.DE C.V.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • Vickers Piston Pump
    • Vickers Piston pump PV
    • Vickers F12 Motor
    • Vickers Double Vane Pump
    • DENISON Vane Pump
    • Hengyuan H Series Pump
    • Hengyuan CY Series Piston Pump
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • QM INDUSTRIES Bearing
    • REXNORD Bearing
    • SEALMASTER Bearing
    • SMITH Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Valves
    • REXROTH Throttle check valve
    • REXROTH Check valves
    • REXROTH Directional spool valves
    • REXROTH Pressure reducing valve
    • REXROTH Throttle valves
    • REXROTH Pressure relief valve
    • REXROTH Twin throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Throttle check valves
    • skf tmsu 1 Bearing
    • ntn 6004lu Bearing
    • 6203 ntn Bearing
    • 6202lu Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • Vickers Piston Pump
  • Vickers Piston pump PV
  • Vickers F12 Motor
✖

Home

Stock Categories

Technical Articles

Vickers Piston Pump

Vickers Piston pump PV

Vickers F12 Motor

Contact Us