• 922-6235|
  • Request a quote
English
English
BEARING MEXICO,S.A.DE C.V.
BEARING MEXICO,S.A.DE C.V.

Timken 46790 Bearing

  Vickers Piston Pump   Vickers Piston pump PV   Vickers F12 Motor  
  • Home
  • Stock Categories
    • Vickers Piston Pump
    • Vickers Piston pump PV
    • Vickers F12 Motor
    • Vickers Double Vane Pump
    • DENISON Vane Pump
    • Hengyuan H Series Pump
    • Hengyuan CY Series Piston Pump
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • QM INDUSTRIES Bearing
    • REXNORD Bearing
    • SEALMASTER Bearing
    • SMITH Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Valves
    • REXROTH Throttle check valve
    • REXROTH Check valves
    • REXROTH Directional spool valves
    • REXROTH Pressure reducing valve
    • REXROTH Throttle valves
    • REXROTH Pressure relief valve
    • REXROTH Twin throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Throttle check valves
    • skf tmsu 1 Bearing
    • ntn 6004lu Bearing
    • 6203 ntn Bearing
    • 6202lu Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • Vickers Piston Pump
  • Vickers Piston pump PV
  • Vickers F12 Motor
✖

Home

Stock Categories

Technical Articles

Vickers Piston Pump

Vickers Piston pump PV

Vickers F12 Motor

Home>Products>REXNORD Bearing>REXNORD ZT95215B Take Up Unit Bearings

  • REXNORD ZT95215B Take Up Unit Bearings
  • REXNORD ZT95215B Take Up Unit Bearings
  • REXNORD ZT95215B Take Up Unit Bearings
  • REXNORD ZT95215B Take Up Unit Bearings

REXNORD ZT95215B MODELS

Need a CAD or 3D Model?

What is ZT95215B bearing cross reference？
Contact NowWhatsAppBe Our Agent

REXNORD ZT95215B Take Up Unit Bearings

category

REXNORD Bearing

REXNORD ZT95215B SPECIFICATIONS

  • QuestionREXNORD ZT95215B Take Up Unit Bearings ? Find what you 3510 lbf Basic Dynamic Radial Load Rating need BEARING MEXICO,S.A.DE C.V. faster 1.5625 in Width A by entering your REXNORD Bearing information .

  • REXNORD

  • ZT95215B

  • 3/16 in
  • Standard Blue Paint
  • Axial Piston Pumps
  • PVM018
  • 33.0 LB
  • Right Hand (CW)
  • PVM018ER02AE01AAA07000000A0A
  • PVM018ER02AE01AAA07000000A0A
BEARING MEXICO,S.A.DE C.V.

BEARING MEXICO,S.A.DE C.V.China

  • BEARING MEXICO,S.A.DE C.V.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

REXNORD ZT95215B Take Up Unit Bearings Products and services

  • Open Circuit Axial
  • 1800 rpm
  • 4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm
  • SAE-20
  • 0.75 in
  • 3/4
  • Straight Keyed
  • 8.2 gpm @ 1750 rpm
  • SAE-12
  • Electric Motor Speeds
  • Pressure Compensator
  • 0.94 in
  • End Port
  • Buna-N
  • 3.25 in
  • 8.2
  • SAE A, 2 Bolt
  • 4 3/16 in
  • Adjustable Maximum Displacement Stop & Single Shaft Seal
  • SAE 19-1
  • 918
  • N/A
  • 5000
  • 22 hp
  • Single Pump, Non-Thru-Drive
  • 1.1
  • 62
  • None
  • 5000 psi
  • 4000
  • 4600
  • 70 Bar

REXNORD ZT95215B REXNORD ZT95215B Take Up Unit Bearings Systems

You may like REXNORD Bearing as bellow

No.BranddNounUNSPSCWeightInventorySlot WidthWeight / LBSHousing Style
MGT952157REXNORD2.938 Inch | 74.625 MillimeterBearing3117153345.40.00 Inch | 0 Millimeter100Center Pull Vertical Elevator Head End
MHT9521512REXNORD2.938 Inch | 74.625 MillimeterBearing3117153358.1120.00 Inch | 0 Millimeter128Center Pull Vertical
MHT9521524REXNORD2.938 Inch | 74.625 MillimeterBearing3117153372.1860.00 Inch | 0 Millimeter159Center Pull Vertical
MHT9521536REXNORD2.938 Inch | 74.625 MillimeterBearing3117153386.710.00 Inch | 0 Millimeter191Center Pull Vertical
MHT9521518REXNORD2.938 Inch | 74.625 MillimeterBearing3117153364.4680.00 Inch | 0 Millimeter142Center Pull Vertical
MHT9521530REXNORD2.938 Inch | 74.625 MillimeterBearing31171533790.00 Inch | 0 Millimeter174Center Pull Vertical
ZST9521518REXNORD - - - 81.720.0 - - -
ZNT9521524REXNORD2.938 Inch | 74.625 MillimeterBearing3117153352.210.00 Inch | 0 Millimeter115Top Angle
ZNT9521518REXNORD2.938 Inch | 74.625 MillimeterBearing3117153355.3880.00 Inch | 0 Millimeter95Top Angle
ZFT9521512REXNORD2.938 Inch | 74.625 MillimeterBearing3117153351.7560.00 Inch | 0 Millimeter114Center Pull Horizontal Elevator Boot End
ZGT952157REXNORD2.938 Inch | 74.625 MillimeterBearing3117153345.40.00 Inch | 0 Millimeter100Center Pull Vertical Elevator Head End

 

2.938 Inch | 74.625 Millimeter x 4.875 Inch | 123.83 Millimeter x 3.25 Inch | 82.55 Millimeter REXNORD MAS5215 Pillow Block BearingsPressure Port Size, Cover End:3/16 in; Cover End Pressure [Max:Standard Blue Paint; Mounting Flange:Axial Piston Pumps; Major Diameter [Max:PVM018; Major Diameter [Min:33.0 LB; Relief Valve Setting:Right Hand (CW); Cover End Flow @ RPM:PVM018ER02AE01AAA07000000A0A; Shaft Seal Type:Tube Ports; Cover End RPM [Max:Open Circuit Axial; Port Orientation - Cover End:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
2.188 Inch | 55.575 Millimeter x 3.313 Inch | 84.14 Millimeter x 2.5 Inch | 63.5 Millimeter REXNORD MEP2203B Pillow Block BearingsMinor Diameter [Max:3/16 in; Controlled Flow Rate:Standard Blue Paint; GPM @ 1,800 rpm, Shaft End:Axial Piston Pumps; Shaft Seal Type:PVM018; Displacement Cover End (cu in/revolution):33.0 LB; Shaft End Flow @ RPM:Right Hand (CW); Minor Diameter:PVM018ER02AE01AAA07000000A0A; Manufacturer Part No.:Tube Ports; Cover End Pressure [Max:Open Circuit Axial; Major Diameter [Max:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
3.438 Inch | 87.325 Millimeter x 4.375 Inch | 111.13 Millimeter x 3.75 Inch | 95.25 Millimeter REXNORD MA230766 Pillow Block BearingsDisplacement Shaft End (cu in/revolution):3/16 in; Displacement Cover End (cu in/revolution):Standard Blue Paint; Shaft End Pressure [Max:Axial Piston Pumps; Manufacturer Part No.:PVM018; Cover End Flow @ RPM:33.0 LB; Major Diameter [Min:Right Hand (CW); Integral Valve Configuration:PVM018ER02AE01AAA07000000A0A; Cover End Pressure [Max:Tube Ports; Major Diameter [Max:Open Circuit Axial; Shaft End Flow @ RPM:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
REXNORD MBR5111 Flange Block BearingsCover End RPM [Max:3/16 in; Integral Valve Configuration:Standard Blue Paint; Seal Material:Axial Piston Pumps; GPM @ 1,800 rpm, Shaft End:PVM018; Displacement Cover End (cu in/revolution):33.0 LB; Spline Description:Right Hand (CW); Relief Valve Setting:PVM018ER02AE01AAA07000000A0A; Major Diameter [Min:Tube Ports; Pressure Port Size, Cover End:Open Circuit Axial; Mounting Flange:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
5 Inch | 127 Millimeter x 7.875 Inch | 200.03 Millimeter x 6.125 Inch | 155.575 Millimeter REXNORD ZPS5500F0540 Pillow Block BearingsCover End Flow @ RPM:3/16 in; Manufacturer Part No.:Standard Blue Paint; Spline Description:Axial Piston Pumps; Shaft End Flow @ RPM:PVM018; GPM @ 1,800 rpm, Cover End:33.0 LB; Cover End Pressure [Max:Right Hand (CW); Shaft Seal Type:PVM018ER02AE01AAA07000000A0A; Max. RPM [Max:Tube Ports; Minor Diameter [Max:Open Circuit Axial; Minor Diameter:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
REXNORD AMF5315 Flange Block BearingsCover End Flow @ RPM:3/16 in; Port Orientation - Cover End:Standard Blue Paint; GPM @ 1,800 rpm, Cover End:Axial Piston Pumps; Shaft End Flow @ RPM:PVM018; Major Diameter [Max:33.0 LB; Mounting Flange:Right Hand (CW); Integral Valve Configuration:PVM018ER02AE01AAA07000000A0A; Cover End RPM [Max:Tube Ports; Controlled Flow Rate:Open Circuit Axial; Shaft End Pressure [Max:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
REXNORD ZBR6215 Flange Block BearingsControlled Flow Rate:3/16 in; Major Diameter [Min:Standard Blue Paint; Shaft Seal Type:Axial Piston Pumps; Port Orientation - Shaft End:PVM018; Cover End RPM [Max:33.0 LB; Shaft End RPM [Max:Right Hand (CW); Minor Diameter [Min:PVM018ER02AE01AAA07000000A0A; Relief Valve Setting:Tube Ports; Manufacturer Part No.:Open Circuit Axial; Pressure Port Size, Shaft End:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
2.438 Inch | 61.925 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.75 Inch | 69.85 Millimeter REXNORD BMA2207 Pillow Block BearingsMajor Diameter [Min:3/16 in; Spline Description:Standard Blue Paint; Controlled Flow Rate:Axial Piston Pumps; Minor Diameter:PVM018; Cover End RPM [Max:33.0 LB; Major Diameter [Max:Right Hand (CW); Cover End Pressure [Max:PVM018ER02AE01AAA07000000A0A; Displacement Shaft End (cu in/revolution):Tube Ports; Mounting Flange:Open Circuit Axial; Pressure Port Size, Shaft End:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
REXNORD KBR6207 Flange Block BearingsMajor Diameter [Max:3/16 in; Cover End RPM [Max:Standard Blue Paint; Major Diameter [Min:Axial Piston Pumps; Shaft End RPM [Max:PVM018; Minor Diameter:33.0 LB; Pressure Port Size, Cover End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:PVM018ER02AE01AAA07000000A0A; Port Orientation - Cover End:Tube Ports; Manufacturer Part No.:Open Circuit Axial; Shaft Length:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
4.438 Inch | 112.725 Millimeter x 6.25 Inch | 158.75 Millimeter x 5.75 Inch | 146.05 Millimeter REXNORD ZP5407YF Pillow Block BearingsShaft End RPM [Max:3/16 in; Seal Material:Standard Blue Paint; Major Diameter [Max:Axial Piston Pumps; Shaft Length:PVM018; Max. RPM [Max:33.0 LB; Port Orientation - Cover End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:PVM018ER02AE01AAA07000000A0A; Minor Diameter:Tube Ports; Mounting Flange:Open Circuit Axial; Displacement Shaft End (cu in/revolution):1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
2.688 Inch | 68.275 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.5 Inch | 88.9 Millimeter REXNORD MP6211 Pillow Block BearingsShaft Length:3/16 in; Displacement Shaft End (cu in/revolution):Standard Blue Paint; Cover End Flow @ RPM:Axial Piston Pumps; Spline Description:PVM018; Max. RPM [Max:33.0 LB; Shaft End Pressure [Max:Right Hand (CW); Port Orientation - Shaft End:PVM018ER02AE01AAA07000000A0A; Cover End RPM [Max:Tube Ports; GPM @ 1,800 rpm, Cover End:Open Circuit Axial; Port Orientation - Cover End:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;
2.188 Inch | 55.575 Millimeter x 3.313 Inch | 84.14 Millimeter x 2.5 Inch | 63.5 Millimeter REXNORD MA220366 Pillow Block BearingsShaft Seal Type:3/16 in; Minor Diameter [Min:Standard Blue Paint; Pressure Port Size, Cover End:Axial Piston Pumps; Spline Description:PVM018; Cover End RPM [Max:33.0 LB; Shaft End Flow @ RPM:Right Hand (CW); Cover End Flow @ RPM:PVM018ER02AE01AAA07000000A0A; Pressure Port Size, Shaft End:Tube Ports; Shaft End RPM [Max:Open Circuit Axial; Manufacturer Part No.:1800 rpm; Flow @ RPM:4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm; Inlet Port:SAE-20; Shaft Dia.:0.75 in; Shaft Size:3/4; Shaft Type:Straight Keyed; GPM @ Speed:8.2 gpm @ 1750 rpm; Outlet Port:SAE-12; Valve Plate:Electric Motor Speeds; Control Type:Pressure Compensator; Shaft Length:0.94 in; Port Location:End Port; Seal Material:Buna-N; Pilot Diameter:3.25 in; GPM @ 1,800 rpm:8.2; Mounting Flange:SAE A, 2 Bolt; Bolt Circle Dia.:4 3/16 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE 19-1; Input Torque [Max:918; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:22 hp; Manufacturer Part No.:PVM018ER02AE01AAA07000000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):1.1; Torque @ 3000 psi [Max:62; Flow Compensator Setting:None; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:70 Bar;

 

Rex and Link-Belt Spherical Roller Bearing Units - Rexnord

Feb 3, 2016 - *Load exceeds 25% of the C rating, consult Rexnord Bearing ... Load Ratings & Speed Limits, see Rexnord Spherical Roller Bearings Load

Link-Belt Spherical Roller Bearings - Bearings | Rexnord

Link-Belt bearings are the workhorse of the bearing industry. Link-Belt's rugged spherical roller bearings perform with outstanding misalignment capabilities, 

PEA355 Link-Belt Pillow Blocks Ball Bearings - Rexnord

PEA355 Link-Belt 300 Series Heavy Duty Pillow Block Ball Bearing 10442937 PEA355 3 7/16 PILLOWBLK BALL BRG 662864297080

Bearings: Ball, Cylindrical, Filament, Sleeve, and ... - Rexnord

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

Bearings: Ball, Cylindrical, Filament, Sleeve, and ... - Rexnord

Rexnord bearing brands, Rex, Link-Belt, Duralon and Tuflite Bearings provide performance and quality in spherical & cylindrical roller, ball, sleeve, and filament 

 

REXNORD ZT95215B Take Up Unit Bearings Video

 

Contact Us

BEARING MEXICO,S.A.DE C.V.
AddressCircuito Progreso No.120, Parque Industrial de Logistica Automotoriz (PILA), C.P.20340, Aguascalient
Phone(Working Time)922-6235
  • BEARING MEXICO,S.A.DE C.V.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

REXNORD ZT95215B Technical Articles

what is koyo hi cap bearings
List of product types/Product information/Koyo Bearings (JTEKT)Introduction page of the list of types of bearings. You can choose bearings suitable for various purposes such as ball bearings (deep groove ball bearings),  Tapered roller bearing...
ina bearings distributor size catalogue
Schaeffler Group USA IncUnder the brands LuK, INA, FAG, and Ruville we offer clutch and release ranging from high-speed and high-precision bearings with small diameters to  INA bearings distributor | Schaeffler Germany - Nodes bearingProducts 1...
timken bearing grease cad model
Timken Wheel Bearing Grease - 425g | Supercheap AutoTimken. Timken Wheel Bearing Grease - 425g. Details. https://www.supercheapauto.com.au/p/timken-timken-wheel-bearing-grease---425g/108470.html Automotive Wheel Bearing Grease | The Timken...

REXNORD Bearing CATEGORIES

  • Vickers Piston Pump
  • Vickers Piston pump PV
  • Vickers F12 Motor
  • Vickers Double Vane Pump
  • DENISON Vane Pump
  • Hengyuan H Series Pump
  • Hengyuan CY Series Piston Pump
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • CONSOLIDATED BEARING
  • QM INDUSTRIES Bearing
  • REXNORD Bearing
  • SEALMASTER Bearing
  • SMITH Bearing
  • REXROTH HY-CHECK VALVE
  • REXROTH Valves
  • REXROTH Throttle check valve
  • REXROTH Check valves
  • REXROTH Directional spool valves
  • REXROTH Pressure reducing valve
  • REXROTH Throttle valves
  • REXROTH Pressure relief valve
  • REXROTH Twin throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Throttle check valves
  • skf tmsu 1 Bearing
  • ntn 6004lu Bearing
  • 6203 ntn Bearing
  • 6202lu Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Original Hydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
MORE

Customers Who Viewed REXNORD ZT95215B Also Viewed

  • REXNORD ZBR6215 Flange Block Bearings
  • 2.188 Inch | 55.575 Millimeter x 3.313 Inch | 84.14 Millimeter x 2.5 Inch | 63.5 Millimeter REXNORD MEP2203B Pillow Block Bearings
  • 2.938 Inch | 74.625 Millimeter x 4.875 Inch | 123.83 Millimeter x 3.25 Inch | 82.55 Millimeter REXNORD MAS5215 Pillow Block Bearings
  • REXNORD KBR6207 Flange Block Bearings
  • 4.438 Inch | 112.725 Millimeter x 6.25 Inch | 158.75 Millimeter x 5.75 Inch | 146.05 Millimeter REXNORD ZP5407YF Pillow Block Bearings

Top Products

SMITH YR-1-1/8-X Cam Follower and Track Roller - Yoke Type REXNORD ZBR6215 Flange Block Bearings DENISON T6ED-052-038-1R00-C100 Vane Pump
Vickers PVH141QIC-RSM-13S-11-C25-31 Piston Pump Timken 46790 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING MEXICO,S.A.DE C.V.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • Vickers Piston Pump
    • Vickers Piston pump PV
    • Vickers F12 Motor
    • Vickers Double Vane Pump
    • DENISON Vane Pump
    • Hengyuan H Series Pump
    • Hengyuan CY Series Piston Pump
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • CONSOLIDATED BEARING
    • QM INDUSTRIES Bearing
    • REXNORD Bearing
    • SEALMASTER Bearing
    • SMITH Bearing
    • REXROTH HY-CHECK VALVE
    • REXROTH Valves
    • REXROTH Throttle check valve
    • REXROTH Check valves
    • REXROTH Directional spool valves
    • REXROTH Pressure reducing valve
    • REXROTH Throttle valves
    • REXROTH Pressure relief valve
    • REXROTH Twin throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Throttle check valves
    • skf tmsu 1 Bearing
    • ntn 6004lu Bearing
    • 6203 ntn Bearing
    • 6202lu Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Original Hydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
  • Technical Articles
  • Vickers Piston Pump
  • Vickers Piston pump PV
  • Vickers F12 Motor
✖

Home

Stock Categories

Technical Articles

Vickers Piston Pump

Vickers Piston pump PV

Vickers F12 Motor

Contact Us